金属回收工厂/Aljoša Dekleva

发布于：2023-05-05 18:28:21

metal recycling plant

设计方：Aljoša Dekleva

分类：工业建筑

内容：实景照片

图片来源：Matevž Paternoster

图片：20张

这是由Aljoša Dekleva设计的金属回收工厂，位于斯洛文尼亚。什么是可持续？什么是绿色回收？这个金属回收厂就是可持续和绿色循环理念的最好体现。金属回收厂现将不同的金属集合起来，然后再将其分开，以便集中起来使用在更有效的地方。
该项目包括一个巨大的生产工厂，以及在边缘上的两个金属堆。我们清楚地划分开各种金属的区域，并将其分类堆放，这样可以在使用的时候最快速地使用它们。另外，在这些金属堆的旁边附加了混凝土平台，并将这些金属压缩成一个个小块堆叠起来，这种保存方式能够在最有限的空间中堆积更多的金属。
另一方面，收集到的金属并不是所有的都100%可用，在分类的过程中将不适合再次使用的金属单独分开。如在一幢拆掉的大楼中，回收来的材料有混凝土，以及其他从结构到表层的钢材，前者利用率很低，而后者却可再生利用，因此我们将这些都区分开，并打包堆叠，这样在二次使用的过程中能节省很多时间。

原文链接：

What is long-lasting and what is recycle friendly was one of the key questions we were able to follow in the project for a metal recycle plant, where they first accumulate and then separate different waste metals and prepare them for reuse. The project consists of an immense production plateau and two small buildings on the edge of it.
We clearly divided the generic base, flexible for multiple-use and the very specific, non-flexible, therefore ephemeral and recycle friendly by its activity. In these terms the huge concrete plateau with a definition wall and the attached concrete service building define the core of the current production, however they easily allow for change of program within the industrial zone. This huge part of the project required careful placing of the plateau in the environment ensuring least earth works and the lowest concrete wall possible.
On the other hand, the small 100% metal office building works as a very specific control deck supervising the weighing of the incoming waste and out-coming metals. Since this specificity means non-adaptability we had to allow for easy and clear on-site recycling when this building is not needed anymore. In contrast to the very rough production that goes on at the site we have embedded some abstract or we like to think “poetic” content in the project. The two buildings are of the same volume, but materially very different: one is made entirely out of concrete, whereas the other is all steel – from structure to cladding.