葡萄牙科技与管理学院教学楼/MONTENEGRO Architects

发布于：2023-06-28 09:37:00

STM School of Technology and Management

设计方：MONTENEGRO Architects

位置：葡萄牙

分类：教育建筑

内容：实景照片

建筑设计负责人：Nuno Montenegro

合作人：Carla Cameira, Susana Ataíde, Rute Ribeiro, Pedro Carvalho e Mariana Medeiros

图片：71张

摄影师：FG+SG Fotografia de Arquitectura

这是由MONTENEGRO Architects设计的科技与管理学院教学楼。建筑面积约11600平方米，场地为一块90×80米的矩形用地。该建筑大致可分为A到E五个体块。

A体块是一个80.9米长的连续的预应力混凝土结构体，令人印象至为深刻。其主要特点是漂浮在学校主入口上方的横跨50.80米长的门框。这门框由两根承担交通功能的柱子、内布置了两个理论课大课室及展览室的水平向构件组成。水平向的门框由两个横跨的纵向预应力混凝土箱型梁组成。

译者：艾比

The School of Technology and Management of the Polytechnic Institute of Beja is a building of about 11600- sqm of construction area, set in a rectangular frame of 90×80 m2. The building was conceptually divided into five blocks from A to E.

The block A is the most impressive – a continuous pre-stressed concrete structure of 80,90m length. Its main characteristic is a unique portal frame with 50,80m span floating above school’s main entrance.

This portal frame consists of two columns, which are the circulation shafts, and a horizontal member containing two auditoriums for theory classes and an exhibition room at the center. That horizontal member of the portal frame consists of two longitudinal pre-stressed concrete box type beams overpassing the big span. These two beams, with different heights because of the configuration of the auditoriums, are the support of the roof and bottom slab of the auditoriums, at top and bottom flange level.

The higher beam, located at the bottom end of the auditoriums has 7,82 m height and lodges the corridor for the room’s access, and the other beam, at the upper end of the auditoriums, has a medium height of 3,50m.In an article published in the New Yorker Design Magazine, CC Sullivan wrote: “Montenegro’s architecture it’s a bit surrealist, perhaps Giorgio de Chirico with a dash of M.C. Escher (…) concluding “the building never fails to create opportunities for reflection. The theatricality and grandeur are unmatched (…)”